X

How to Clean Shark Vacuum Brush Rolls?

How to Clean Shark Vacuum Brush Rolls, Filter, and Dust Cup

A vacuum cleaner is one of the essential tools that can clean our house with a blink, and that’s why owning a powerful and high-quality vacuum cleaner is really crucial for every homeowner. But just as they take care of the dirt and maintains cleanliness in your home, they also need to be cleaned to ensure optimal performance.
If you’ve got a Shark Vacuum, then you have literally found one of the best and most efficient vacuums out there. They usually don’t require much maintenance, and some also have self-cleaning features, meaning you won’t have to detach the parts for cleaning purposes. Congratulations!!
But if you have recently noticed that your vacuum isn’t picking up the dirt and debris as it was before, it’s a good sign that they need to be cleaned as soon as possible. Poor suction can damage your vacuum’s motor because it tends the machine to work harder.
Your little negligence can ruin your hundreds of dollars investment, so hurry up and clean save your vacuum cleaner’s life.
Dust can accumulate anywhere, either in brush rolls, dust cup, or the filters. That’s why I have prepared a complete guide where you’ll learn how to clean shark vacuum brush rolls, filter, dust cup, and ensure top-notch service for years. So, let’s dive in!

How to Clean Shark Vacuum Brush Rolls

Before attempting any cleaning process, make sure to unplug the device. Never attempt to clean by keeping it connected to any electrical outlets. Also, take necessary protective accessories like gloves, masks, etc.
If the brush roll fills up, it’ll push the dirt around and won’t pick them up. So, it’s really very important to take out accumulated hairs and debris from the brush roll. Otherwise, the consequence is stated above.
To start with the process, you have to first push the floor nozzle button and release the cleaning head. Next, take a screwdriver and unscrew the brush roll cover. It’ll provide you with adequate access to the brush rolls so that you can remove all hairs and debris from that wrapped in the brush rolls.
Okay, now that you have got the access, clip out all the hairs and dirt particles using a pair of scissors. Don’t hurry, and make sure not to clip the brushes or cause any harm to them.
Once you clip the hairs and debris, you can now easily take them out from the brush rolls. If you notice any residue, pull them using your hand. You can use the scissors if you need to clip it again.
Check if you have cleaned it properly or not. If everything is alright, it’s time to reassemble the vacuum. So, put the brushes where they were and screw the cover. Your vacuum brush will now regain its youth and pick up the dirt particles efficiently.

How to Clean Shark Vacuum Filter

Well, this is going to be a bit dirtier. However, unplug the device, and let’s get started.

Shark Vacuum uses different types of filters; these are mainly HEPA filter, foam cylinder filter, and felt disc filter. But don’t worry; there’s a common technique for cleaning any of them.
First of all, you have to start with the dust cup first. So, empty all dirt and debris. Then remove the foam, felt disc, or whatever filter your machine has inside. If your device uses a felt disc filter, make sure to use the tab. It’ll help you to remove the filter safely, avoiding damages.
You can use warm soapy water to clean both foams and felt disc; it won’t damage them. Start the cleaning and continue it until the water runs clear. The clean water indicates that all the dirt and debris has been washed away.
But what about the HEPA filters?? Actually, there are two types of HEPA filters, and that’s why I didn’t mix them up. This is because one of these HEPA filters are reusable and easily washable while the other one is not. So, you need to identify which one you’ve got. Look for the manual; it’s clearly written in every Vacuum cleaners of Shark.
If you have got a washable HEPA filter, you can rinse it entirely under running water. Make sure to do this carefully until the waters run clear. Once you have complete that, allow it to air dry outside.
In the case of the non-washable HEPA filters, take it outside and tap it lightly against a hard surface. When you notice that no dust is coming out of it, you can use it again. Taping too hard can damage the filter, so keep this in mind.
Typically, air-drying the filters for 24 hours is ideal once after cleaning them. It sometimes also depends on the weather condition, so give them the required time and make sure to reuse them when they’re appropriately dried. Do not use damp or wet filters in your vacuum; it can cause the growth of mold and mildew.

How to Clean Shark Vacuum Dust Cup

Okay, you have learned how to clean shark vacuum brush roll and filters, now there’s only one thing left to clean. It’s the dust cup.
When dirt and debris get stuck inside of the dust cup, you’ll notice a strong odor coming out from your vacuum cleaner. This usually happens when you have pets in your house. Pet hairs are mainly responsible for this as they cling inside the dust cup.
You can use soapy water and a sponge to scrub the dust cap properly until it becomes properly clean. If you feel complications to reach the bottom part, you can also use a brush to clear all stubborn dirt and stains away.
After that, you can rinse it and keep it for air dry. If needed, you can use a cloth to make sure it has dried completely. Now, it’s time to reassemble it.

Wrapping Up

Hopefully, these processes will be way more helpful for cleaning your vacuum cleaner and extending its lifespan to the fullest. . By the way, if you have allergy issues which can get triggered by dirt and dust, then I will recommend not clean these pieces of stuff by yourself. Even after knowing this, you want to do it yourself, make sure to use adequate protective accessories. Happy Cleaning!!

Rayhan: